Cashmere-52 Artificial Turf
73 oz, 2.0" Height, Soft Diamond Blade.
- 73 oz. Total Weight, 2.0" Height
- Diamond Shape Blade
- Rolls 15 ft Wide
- Polyethylene
Photos
Professional Opinion
Cashmere-52 artificial turf is soft grass with an average cushioning. Its recovery rate is lower than average and requires brushing to stand upright making it ideal for light to moderate traffic. Turf temperature under the direct sun is lower than average. The material is resistant to wear and tear but will show begin showing signs of usage.
See the results and test specifications below.
Test Results
Softness
Meter showed 62 degrees of angle adjustment.
Softer than average.
Cushion
The tennis ball jumped 20 inches. This provides nearly double to cushion of our office carpet!
Recovery
Blades recovered 86%
Temperature test
The recorded temperature is 130.4 degrees. This is 8.8 degrees warmer than a piece of plastic under the same conditions.
Wear and Tear
Blades changed shape, recovered to 65%. Wear is visible. No structural damage to blades or backing.
Test Specifications
Every test we conduct is measured and compared to a test item for easier understanding.
- How do you measure turf softness?
-
We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.
The fewer degrees on the ruler, the softer the turf.
- How do you measure cushion?
-
We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion. The less it bounces, the more cushion the artificial grass provides.
We compare results to the bounce carpet provides for clarity.
- How do you determine turf recovery?
-
We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original.
- How do you measure temperature?
-
We measure the temperature under the direct sun after 30 minutes of exposure without wind.
As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.
- How do you assess wear and tear?
-
We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.
Need help?
Request professional assistance from our support team.
Receive a custom quote with options.