Baby Touch Artificial Turf
90 oz, 1.7" Height, Soft W Blade.
$2.89 per sq. ft.
As soft as a bunny. Cool and bouncy.
Artificial Turf Material Description
- 90 oz. Total Weight, 1.7" Height
- Tidal Wave W Blade
- Rolls 15 ft Wide
- Polyethylene
Photos
Professional Opinion
Baby Touch artificial turf is soft grass with great cushioning. It recovers well and looks new after a bit of brushing. Turf temperature under the direct sun is lower than average. The material is resistant to wear and tear but will show signs of heavy use.
See the results and test specifications below.
Test Results
Softness
Meter showed 68 degrees of angle adjustment.
Softer than average.
Cushion
The tennis ball jumped 18 inches. This grass provides double caution compared to office carpet.
Recovery
Blades recovered 92%
Temperature test
The recorded temperature is 127.1 degrees. This is 2.2 degrees cooler than a piece of plastic under the same conditions.
Wear and Tear
Blades changed shape, recovered to 70%. Wear is visible. No structural damage to blades or backing is showing.
Test Specifications
Every test we conduct is measured and compared to a test item for easier understanding.
- How do you measure turf softness?
-
We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.
The fewer degrees on the ruler, the softer the turf.
- How do you measure cushion?
-
We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion. The less it bounces, the more cushion the artificial grass provides.
We compare results to the bounce carpet provides for clarity.
- How do you determine turf recovery?
-
We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original.
- How do you measure temperature?
-
We measure the temperature under the direct sun after 30 minutes of exposure without wind.
As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.
- How do you assess wear and tear?
-
We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.
Need help?
Request professional assistance from our support team.
Receive a custom quote with options.